FSWERKS Lower Rear Engine Mount - Ford Focus Duratec 2.0L 2008-2011
SKU: FS044N
The Ford Focus factory engine mounts were designed as soft, flexible units, to provide a comfortable drive. The drawback was the relatively large amount of engine movement the OEM mounts allowed under torque load and on hard acceleration. Such engine movement decreases stability under high performance driving conditions and rapid gear selection.
To reduce this movementΒ FSWERKS engineered a complete fitted replacement with specially shaped molded, 70A durometer polyurethane inserts. The mount body is machined from billet aircraft grade aluminum, being almost twice as strong than the OE cast material. Installation should take no more than 15 minutes. This high performance mount provides a difference in the stability of the car when accelerating and braking hard. Gear changing under hard acceleration is also enhanced.
ReplacementΒ polyurethane and metal inserts are also offered.
NOTE:Β For street use, we recommend using only the rear engine mount. Using all mounts together will cause some vibration (due to the nature of performance polyurethane mounts) that may not be desired for a daily driver, and is more for track use (Road racing, drag racing, autocross, etc).
Torque Specifications: (44ft lbs) two bolts
Fitment:
Ford Focus Duratec 2.0L 2008 2009 2010 2011 (Sedan and coupe both automatic and manual transmission cars)
Reluctantly purchased
2008 Ford Focus SE 2.0l duratec Comparing this mount to the stock-style I had no faith. I swore it wouldn't fit at all. Mind you, I replaced the stock mount about 2 years ago. This one was far more solid, but I thought the polyurethane bushings were too big and hard to get into place. A little Vaseline and it slid right in. My transmission shifts smoother, my engine doesn't rock and roll. It was one of the best purchases I've made in quite awhile. And their customer service was on point. I think my email box is full, didn't see their email. Called em up and we got it straightened up on the spot. Feels a bit like I'm leaving a fake review cuz I got nothing bad to say. It's 2/15/22 and I'm sitting on the pot (and on the clock!)
United StatesFit well with vaseline
Note: had to replace the mount, not the fault of the product. Once actually in and torqued to spec, the engine barely deflects. The clutch is more responsive. To be clear, no one seems to make the torque engine mount for a manual anymore. This item made the car feel more responsive than it was when we bought it. I highly recommend.
United StatesLower Engine Mount
If you are going to increase the horsepower, then it is a good idea to improve the engine mounts. This is a very well-made part and I suggest it to anyone. The shipping was also very good.
United StatesDifficult but excellent !
Very tight fit and had to remove the engine mount for clearance.....but a excellent transmission mount !
United StatesNo Vibration
Replaced another company's poly mount and almost all of the vibration has gone I now have all 3 FSWerks poly mounts and could not be happier.
United StatesLower Rear Engine Mount
The part is awesome! It makes my car run much more smoothly than before.
United States2008 focus SES auto
Experience all together positive. Took advantage of a βblemishedβdogbone on sale. After repeatedly watching various you tube how toβs I was ready. Pre lubed all contact points. Used rampsβ¦ jack with wooden spacer. Bone bolts firstβ¦ mounting hinge second. Cleaned area and lightly lubed it. Holes eventually lined upβ¦.jiggled the engine/trans area till final holes lined up. Donβt forget: the bushing surface with the beveled edge faces down. Torqued to safe specs: 38/40 ft. Pounds. Little more squeaks than before but for an autoβ¦. Itβs okay. With the new FSWERKS sway bars and CAI itβs more responsive. Worth the $ and time. Good luck!
United StatesExcellent Mount
My 09 Focus is mostly a daily driver and commuter, but having upgraded the exhaust, intake, and the clutch from FSWERKS, this mount really ties everything together. The old stock mount was difficult to get out without removing the entire bracket (lots of prying because I didn't have lots of different angled wrenches to get at one of the bolts that's hard to reach), but this mount slips right in place with no issue and is excellent. Holds the motor tight to the frame when accelerating, helps with clutch feel as well because the mount isn't eating up all the engine rotation. Makes me feel just that much more connected to the car when i'm driving, and i really like that.
United StatesExcellent Mount
My 09 Focus is mostly a daily driver and commuter, but having upgraded the exhaust, intake, and the clutch from FSWERKS, this mount really ties everything together. The old stock mount was difficult to get out without removing the entire bracket (lots of prying because I didn't have lots of different angled wrenches to get at one of the bolts that's hard to reach), but this mount slips right in place with no issue and is excellent. Holds the motor tight to the frame when accelerating, helps with clutch feel as well because the mount isn't eating up all the engine rotation. Makes me feel just that much more connected to the car when i'm driving, and i really like that.
United StatesTotally worth the money over OEM part
Completely solved all the issues I was having with OEM motor mount!
United StatesRear engine mount 2010 focus.
Installed in less than a hour!! Great quality and even better performance!!
United States